Pharmintech Turnkey Solutions Private Limited

PHARMINTECH offers supreme quality Static Pass Box, which is made in compliance with world class standards.

Static Pass Box is specifically designed that aids in the material transfer without much personnel movement. Furthermore, the Static Pass Box also acts as a hindrance for entrance of contaminants in a clean room between same classified areas.

Features

• Material of Construction : SS 304 / SS 316 / SS 316 L
• Flush Double walled Construction
• Flush Doors with double walled flush glass view panels
• SS 304 Handles & SS hinges
• Internal coving for easy cleaning
• Microprocessor Based Control System & LED Display with Electro-Magnetic Interlocking System
• Feather touch Door Release Switch on either side
• Indicator on either side

Electricals:

• LED light & UV light along with Hour meter.
• Electromagnet for door interlocking.
• 16 Amps. Three-pin top along with connection cable.

Options And Accessories

• Mechanical Interlocking System
• Provision for ventilation with perforated grille
• U. V. Light with Hour meter & interlocking arrangement to put off U.V. light if eitherdoor opens
• Support Stand to mount the Pass Box on walls
• SS 304 Frames for Pass Box
• Flange for sealing the gap between the pass box and the clean room wall
• Floor mounted construction with three side wall structure & Door Drop Seal

PHARMINTECH Garment Storage Cabinet (GSC) is designed to provide ISO Class 5 (Class 100) particle free work area to meet sterile garment storage needs which avoids any particulate accumulation. The work area is continuously supplied with positive pressure HEPA filtered re-circulated vertical/ horizontal air flow.

An integral HEPA filter and blower assembly provides a continuous wash of class 100 air over the garments. 

Features

• Material of Construction : Powder Coated MS / GI / SS 304 / SS 316 / SS 316 L
• Class 100 compatible
• Two stage filtration
• U.V Light with Hour Meter
• Heater with thermostat
• Interlocking arrangement to put-off U.V. Light if either door opens.
• EU6- Pre filter (95% down to 5 micron) for return air & fresh air intake
• EU13-HEPA Filter (99.97% down to 0.3 micron) at supply position
• Statically & Dynamically balanced motor-blower with suspension arrangement toreduce noise level
• Differential Pressure Gauge: 1 No.
• SS304 Hanging Arrangement/ SS304 Removable Shelves
• SS304 doors with double walled flush glass view panels
• ON/OFF Switches
• PAO Test Port
• 5/15 Amp Switch socket for external equipment
• PU Caster wheels for easy movement
• Leg levelers in SS304

Suction Filter: -

• Filter Casing- AL flange type.
• Efficiency- 95% down to 5 microns (EU-4 Rating.)
• Media- Non-woven synthetic media sandwiched between two layers of high density
• Polyethylene mesh

Supply Filter: -

• Filter Casing- Aluminum factory extruded section.
• Efficiency- (99.997% down to 0.3 micron)
• Media- Micro fiberglass paper media (Imported) pleated along with hot melt glue.

Blower Motor Assembly: -

• Electric Motor-Double Ended Shaft, Single phase, 240 volts, 50Hz.
• Impellers-Aluminum, Statically & Dynamically Balanced, Forward Curve type.
• Blower casings- AL / GI / MS, centrifugal type.

Accessories:

• Magnehelic pressure gauge for checking the pressure drop across the supply Mini pleat Hepa
• Filters. Range- 0 to 25 / 50 mm of WC.
• Hour meter connected to UV light.
• PU caster with SS body and front lockable type wheel.
• S.S.304 levelers for height adjustment.
• Infra-Red light (Optional)

PHARMINTECH Fume Hood (FH) is designed to provide personnel, environmental and product protection. Air flow is drawn around the operator into the front grille of the cabinet, which provides personal protection.

A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most located at a standing work height.

Types of fume hood:

• Super structure benchtop ducted type
• Table type fume ducted hood
• Ductless fume hood

The principle is the same for all types: air is drawn in from the front (open) side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room.

This is used to:

• Protect the user from inhaling toxic gases (fume hoods, biosafety cabinets, glove boxes)
• Protect the product or experiment (biosafety cabinets, glove boxes)
• Protect the environment (recirculating fume hoods, certain biosafety cabinets, and any other type when fitted with appropriate filters in the exhaust airstream)

­­­­­­­Features:

• Material of Construction : Powder Coated MS / GI / SS 304 / SS 316 / SS 316 L
• Class 100 Compatible
• Durable and chemical-resistant construction       
• High performance centrifugal blower
• Double wall construction     
• Easy to clean surfaces
• Vertical sliding sash 
• Efficient LED lighting
• Energy saving blowers

Accessories:

• Gas cock / Aircock
• Hour meter connected to UV light.
• PU caster with SS body and front lockable type wheel.
• S.S.304 height levelers.
• Sink, Water tap with drain arrangement
• Sash (Shutter)
• Wet & Dry Service valves -  1 for Raw water (PU) - 1 for Nitrogen(PU) Ø 1 for Vacuum(Teflon) - 1 for Compressed Air (PU)
• Maintenance ports  - Open-able top panel for easy maintenance of tube light and flow control valveservice panel for maintenance of utility valves and tubing.

Our precision-engineered Dynamic Pass Box assists in transfer of materials driven through a controlled environment but without much personnel movement.

Furthermore, a Dynamic Pass box helps in prevention of contaminants entrance either in the clean room or between different classified areas.

Features

• Material of Construction : SS 304 / SS 316 / SS 316 L
• Class 100 Compatible
• Two Stage filtration
• EU6-Prefilter (95% down to 5 micron) for return air & fresh air intake
• EU13-HEPAFilter (99.997% down to 0.3 micron) at supply position
• Statically & Dynamically balanced Motor- Blowers with suspension arrangement to reduce noise level
• Doors with double walled flush glass view panels
• SS 304 Handles & SS hinges
• Internal coving for easy cleaning
• Microprocessor Based Control System & LED Display with Electro-Magnetic Interlocking System
• Differential Pressure Gauge: 1 No.
• ON/OFF Switch for Motor
• PAO Test Port

Suction Filter: -

• Filter Casing- S.S.304/316 flange type.
• Efficiency- 95% down to 5 microns (EU-4 Rating.)
• Media- Non-woven synthetic media sandwiched between two layers of High Density
• Polyethylene Mesh

Supply Filter: -

• Filter Casing- Aluminum factory extruded section.
• Efficiency- 99.997% down to 0.3 micron
• Media- Micro fiberglass paper media (Imported) pleated along with Hot Melt Glue.

Blower Motor Assembly: -

• 230 Volts, 50 Hz, Single-phase imported blower along with inbuilt motor.

Electricals:

• LED light&UV light along with Hour meter.
• Electromagnet for door interlocking.
• 16 Amps. Three-pin top along with connection cable.

PHARMINTECH Horizontal LAF is designed for offering highest product protection by providing ISO Class 5 particle free work area for handling critical process.

It is suitable for the handling of non-hazardous products, sensible to dust and/or to contamination such as injectable medicines, cell and tissue cultures, food sample preparation for sterility testing, sterile packaging and I. V. pharmacy preparations as well as micromechanics, optics & electronics.

Horizontal laminar workstations create areas supplied with a continuous flow of clean air to maintain a work environment that is free from dirt, particles, and toxic or noxious fumes. Laminar workstations are designed to foster worker comfort, convenience, and productivity.

Features

• Material of Construction : Powder Coated MS / GI / SS 304 / SS 316 / SS 316 L
• Class 100 Compatible
• Glass / Polycarbonate Side panels
• Two Stage filtrations
• EU6-Prefilter (95% down to 5 micron).
• EU13-HEPAFilter (99.997% down to 0.3 micron) at supply position
• Statically & Dynamically balanced Motor- Blowers with suspension arrangement to reduce noise level
• LEDLight
• Differential Pressure Gauge: 1 No.
• ON/OFF Switches
• PAO Test Port
• 5/15 Amp Switch Socket for external equipment

Suction Filter:

• Filter Casing- AL flange type.
• Efficiency- 95% down to 5 microns (EU-4 Rating.)
• Media- Non-woven synthetic media sandwiched between two layers of High Density
• Polyethylene Mesh.

Supply Filter:

• Filter Casing- Aluminum factory extruded section.
• Efficiency- (99.997% down to 0.3 micron)
• Media- Micro fiberglass paper media (Imported) pleated along with Hot Melt Glue

Blower Motor Assembly:

• Electric Motor- double ended shaft, Single phase, 240 volts, 50Hz.
• Impellers-Aluminum, statically & dynamically balanced, forward curve type.
• Blower casings- AL / GI / MS, centrifugal type.

Accessoriees:

• Minihelic pressure gauge for checking the pressure drop across the supply Hepa Filters.
• Gas cock / Aircock
• Hour meter connected to UV light.
• PU caster with S.S. body and front lockable type wheel.
• S.S.304 height levelers.

Electricals:

• Feather touch ON/OFF switches for b/w motor, tube light, UV light & aux. socket with lightindication.
• LED light &UV light along with Hour meter.
• Aux. socket with SS cover plate.
• Three-pin top along with connection cable.

PHARMINTECH Vertical LAF is designed for offering highest product protection by providing ISO Class 5 particle free work area for handling critical process.

It is suitable for the handling of non-hazardous products, sensible to dust and/or to contamination such as injectable medicines, cell and tissue cultures, food sample preparation for sterility testing, sterile packaging and I. V. pharmacy preparations as well as micromechanics, optics & electronics.

Vertical laminar workstations create areas supplied with a continuous flow of clean air to maintain a work environment that is free from dirt, particles, and toxic or noxious fumes. Laminar Air Flow Unit are designed to foster worker comfort, convenience, and productivity.

Features

• Material of Construction : Powder Coated MS / GI / SS 304 / SS 316 / SS 316 L
• Class 100 Compatible
• Glass / Polycarbonate Side panels
• Stand OR Ceiling Mounted
• Two Stage filtrations
• EU6-Prefilter (95% down to 5 micron).
• EU13-HEPAFilter (99.997% down to 0.3 micron) at supply position
• Statically & Dynamically balanced Motor- Blowers with suspension arrangement to reduce noise level
• LED Light
• Differential Pressure Gauge: 1 No.
• ON/OFF Switches
• PAO Test Port
• 5/15 Amp Switch Socket for external equipment

Suction Filter:

• Filter Casing- AL flange type.
• Efficiency- 95% down to 5 microns (EU-4 Rating.)
• Media- Non-woven synthetic media sandwiched between two layers of High Density Polyethylene Mesh.

Supply Filter:

• Filter Casing- Aluminum factory extruded section.
• Efficiency- (99.997% down to 0.3 micron)
• Media- Micro fiberglass paper media (Imported) pleated along with Hot Melt Glue.

Blower Motor Assembly:

• Electric Motor- double ended shaft, Single phase, 240 volts, 50Hz / Three phase, 415 volts, 50Hz.
• Impellers-Aluminum, statically & dynamically balanced, forward curve type.
• Blower casings- AL / GI / MS, centrifugal type.

Accessories:

• Magnehelic pressure gauge for checking the pressure drop across the supply Minipleat Hepa
• Gas cock / Aircock
• Hour meter connected to UV light.
• PU caster with S.S. body and front lockable type wheel.
• S.S.304 height levelers.

Electricals:

• ON/OFF switches for b/w motor, tube light, UV light
• LED light &UV light along with Hour meter.
• 16 Amps. Three-pin top along with connection cable.

PHARMINTECH (BSC) is designed to provide personnel, environmental and product protection. Air flow is drawn around the operator into the front grille of the cabinet, which provides personal protection.

Biosafety cabinets, also known as biological safety cabinets, are enclosed, ventilated laboratory workspace areas designed to protect the user and surrounding environment from pathogens. All exhaust air is HEPA filtered to remove hazardous agents such as viruses and bacteria.

Biosafety cabinets are divided into three classes:

• Class I -provides protection for the user and surrounding environment, but no protection for the sample being manipulated.
• Class II -provides protection for the user, environment, and sample, and is divided into four types: A1, A2, B1 and B2. The main differences are their minimum inflow velocities and exhaust systems.
• Class III - also known as glovebox, provides maximum protection; the enclosure is gas-tight, and all materials enter and leave through a dunk tank or double-door autoclave.

Choice of cabinet therefor depends on level of protection needed for the laboratory worker and the sample of interest. Biological Safety Cabinets conforming to current ISO/TC, NSF/CDC/NIH standards and guidelines. Employing contemporary technologies in micro contamination control, these systems effectively provide both bio exclusion and biocontainment.

­­­­­­­Features

• Material of Construction : Powder Coated MS / GI / SS 304 / SS 316 / SS 316 L
• Class 100 Compatible
• Two Stage filtration
• EU6-Intermediate Filter (95% down to 6 micron)
• EU13-HEPAFilter-Supply/Exhaust (99.97% down to 0.3 micron)
• Statically & Dynamically balanced Motor-blower with suspension arrangement to reduce noise level
• Double walled flushed Glass Side Panels
• SS304 worktable with perforations at front & back which can be removed occasionally for cleaning purpose
• 1-piece fully open able sliding toughened glass front door with counterweight arrangement
• Sealed LED Lights
• Differential pressure gauges: 2 Nos.
• ON/OFF Switches for motor & Lights
• Alarm triggers in case front door is raised more than 8” (i.e. safe clear opening during operation)
• 5/15 Amp Switch Socket for external equipment
• SS304 one-foot-long elbow duct for exhaust

Supply And Exhaust Filter: -

• Filter Casing- Aluminum factory extruded section.
• Media- Micro fiberglass paper media (Imported) pleated along with Hot Melt Glue.

Blower Motor Assembly: -

• Electric Motor-double ended shaft, Single phase, 240 volts, 50Hz.
• Impellers-Aluminum, statically & dynamically balanced, forward curve type.
• Blower casings- AL / GI / MS, centrifugal type.

PHARMINTECH Air Shower is designed to supply Class 100 HEPA filtered air at high velocity to remove particulate matter from the person entering the Clean Room.

Air Showers are self-contained chambers installed at entrances to cleanrooms and other controlled environments. They minimize particulate matter entering or exiting the clean space. Personnel and materials entering or exiting the controlled environment are "scrubbed" by high velocity HEPA-filtered air jets with velocities of 20-22m/s (4000-4300fpm). Contaminated air is then drawn through the base within the unit, filtered and recirculated.

Air showers play a vital role in maintaining these clean-critical settings by removing loose particles of contamination from people and products before they enter the clean room.

Features

• Material of Construction : Powder Coated MS / GI / SS 304 / SS 316 / SS 316 L
• Cleanroom Compatible
• Two Stage filtration
• EU6-Prefilter (95% down to 5 micron) for return air & fresh air intake
• SS 304 doors with double walled flush glass view panels & door closer
• Statically & Dynamically balanced Motor- Blowers with suspension arrangement to reduce noise level for suction and booster
• Differential Pressure Gauge: 1 No.
• ON/OFF Switches
• PAO Test Port
• 5/15 Amp Switch Socket for external equipment Control Systems – to ensure that both the doors cannot open at the same time & to ensure that both the doors will be lockedduring the time air flow is on.
• Timer for setting Air Shower operation time (settable for 30 seconds to 5 minutes)
• Emergency STOP button
• Straight Entry – Straight Exit / 90° L type Door Opening
• Automatic as well as Manual Working

Suction Filter: 

• Filter Casing- AL flange type.
• Efficiency- 95% down to 5 microns (EU-4 Rating.)
• Media- Non-woven synthetic media sandwiched between two layers of High Density
• Polyethylene Mesh

Blower Motor Assembly: -

• Electric Motor - double ended shaft, Three phase, 440volts, 50Hz.
• Impellers-Aluminum, statically & dynamically balanced, forward curve type.
• Blower casings- AL / GI / MS, centrifugal type with anti-vibration mounting.

Accessories: -

• Door closers
• Door handles.
• SS 304 Air jet nozzles.
• 12V, Male-Female electromagnet.

Electricals: -

• Rotary switch with door indicator at entry & exit door.
• Rotary switch with indicator for emergency ON-OFF from inside.
• 40w, LED light
• 16 Amps. Three-pin top along with connection cable.
• 12V, Electromagnet for door interlocking at entry-exit door.
• Sensor plate for door interlocking at entry-exit door

PHARMINTECH Mist Shower is a chamber installed at exit of clean room where Hazardous Product like Onco Drugs, Hormonal Injectables, Sterile products and likewise. It is designed to provide protection during de-gowning process while exiting the area. Wet surfaces will not shred any particles into atmosphere and thus the mist shower became a popular in the Pharmaceutical industry.

It is widely understood that the greatest source of particulate contamination in a cleanroom is from the operator. Mist Showers are typically installed as a physical barrier between operator change areas (grey areas) and the cleanroom (clean area) to help eliminate this primary contamination source.

In addition to its operation, the Mist Shower also enhances cleanroom operating protocol by serving as a reminder to all operators that they are entering a controlled environment. Operatives naturally develop the habit of correctly gowning up before entering the mist shower.

The effectiveness of the system is primarily dependent onMist cycle duration,operator technique during mist cycle,material and design of protective clothing, andthe physical and chemical properties of particulate

Features

• Material of Construction : SS 304 / SS 316 / SS 316 L

• Cleanroom Compatible
• Door - Solid Door with Electromagnet Interlocking
• Blower - Statically & Dynamically balanced
• Interlocking -   Programmable Time Delay on Either Side
• Misting Time -   Programmable Time Spray
• Door Models -   Straight Thru, “L”-Type
• Differential Pressure Gauge - 1 No.
• ON/OFF Switches Control Panel
• PAO Test Port
• Straight Entry – Straight Exit / 90° L Door Opening

• Automatic as well as Manual Working

Construction :

• Main Cubical- Mist Shower Unit-Double Skin Type Inner Skin - SS 304, 20 SWG / Outer Skin - SS 304, 20 SWG Insulation - PUF / Rockwool
• Water Tank - Single Skin - MOC- SS 304, 18 SWG
• Supply and Exhaust Unit - MOC- SS 304, 18 SWG, Single Skin
• Ducting- SS 304, 22 SWG, Single Skin

Blower Motor

• SISW Backward curved direct driven plug type, FLP Fan
• 2 Pole, 3 Phase, Class `F' Insulation
• Capacity - Suitable for 2000 – 5000 CFM

Supply Mist

• Supply of water at 2-3 Kg/cm² and air at 6-7Kg/cm² pressure through ½" BSP pipe up to both air and water manifold is require and then from both manifold to each mist nozzle, air and water supply will be provided through Supply mist through SS 304 Nozzles with air and water inlet to each nozzle through Y-Stainer, ball cock valve, solenoid coil and NRV to water line and Air Filter regulator, ball cock valve and solenoid coil to airline. Main input 8 mm PU pipe and necessary PU fittings.

PHARMINTECH (RLAF) is designed for providing highest level of protection from airborne contaminants generated during powder handling operations such as sampling, charging & dispensing. RLAF provides Operator Protection, Product Protection, and Environment Protection.

The down flow booth operates on a re-circulatory airflow principle providing containment by air movement. A clean, constant, laminar down flow of Class 100 air is supplied in work area suppressing any dust clouds generated during open powder processing: removing and capturing airborne particles from the operator’s breathing zone.

Reverse Laminar Air Flow Unit workstations are suitable for dispensing of powder and chemicals and to minimize the risk of contaminating the work zone and ensure health safety for person working with chemicals/powder. This equipment is based on the recirculation of air and ensures that the cloud formed by the material dispensed, is sucked in a natural pattern of movement, and arrested through prefilters. The air is then supplied back at the work zone through HEPA. After initial cycles, we achieve, class 100 hazard proof laminar movement of air and handling of material. 

Features

• Material of Construction : SS 304 / SS 316 / SS 316 L
• Class 100 Compatible
• Triple Stage Filtration
• EU4-Prefilters (95% down to 10 micron)
• EU7-Internediate Filter (95% down to 5 micron)
• EU13- HEPA Filter-Supply/ Bleed (99.997% down to 0.3 micron)
• Statically & Dynamically balanced Motor-blower with suspension arrangement to reduce noise level
• LED Lights &Differential Pressure Gauge for all 3 Filters
• ON/OFF Switches
• PAO Test Port
• 5/15 Amp Switch Socket for external equipment

Pre Filter (Primary Filter):

• Filter Casing AL flange type.
• Efficiency 90% down to 10 microns (EU 4 Rating.)
• Media Three layers of High-Density Polyethylene Mesh along with AL wire mesh.

Intermidiate Filter (Secondary Filter)

• Filter Casing AL flange type.
• Efficiency 95% down to 5 microns (EU7 Rating.)
• Media Non woven synthetic media sandwiched between two layers of HDPE mesh.            

Supply Filter:

• Filter Casing Aluminum factory extruded section, Box type.
• Efficiency (99.997% down to 0.3 micron)
• Media Micro fiberglass paper media (Imported) pleated along with Hot Melt Glue.

Bleed Filter:

• Filter Casing Aluminum factory extruded section.
• Efficiency (99.997% down to 0.3 micron)
• Media Micro fiberglass paper media (Imported) pleated along with Hot Melt Glue.

Blower Motor Assembly:

• Electric Motordouble ended shaft, Single phase, 240 volts, 50Hz.        
• Impellers Aluminum, statically & dynamically balanced, forward curve type.        
• Blower casings AL / GI / MS, centrifugal type with spring suspension.   

Electricals:

• Feather touch ON/OFF switches for b/w motor, tube light, UV light & aux. socket with light indication.
• LED light 
• 6/16 Amps, Aux. socket with s.s.cover plate.      
• 16 Amps. Three pin top along with connection cable

  Laminar Air Flow Trolley is designed for transporting sterile products under ISO Class 5 (Class 100) particle free work area. The work area is continuously supplied with positive pressure HEPA filtered re-circulated horizontal air flow.

General Specifications:

• Two Stage filtration
• Battery back-up with inverter for 30 minutes
• PU coated Lockable castor wheels
• EU6-Prefilter (95% down to 5 micron) for return air & fresh air intake
• EU13-HEPAFilter (99.97% down to 0.3 micron) at supply position
• Statically & Dynamically balanced Motor- Blowers with suspension arrangement to reduce noise level for suction and booster
• Dwyer make Differential Pressure Gauge: 1 No.
• SS 304 removable shelves
• SS 304 doors with double walled flush glass view panels
• SS 304 handle for mobility
• ON/ OFF Switches
• DOP Test Port

Options & Accessories:

• A wide range of configurations to suit any containment application:
• Velocity display with alarms (audible and visible)
• Filter blocked alarms (audible and visible)
• Explosion proof electrics for Flame-proof applications
• Blower tripping alarms (audible and visible)
• MLAF can also be customized as per client’s requirements